- Don't Focus on Just Minor Leaguers - Many owners convince themselves they are running the Pittsburgh Pirates and enter a continual state of re-building. They trade their studs at the end of every season for a collection of minor leaguers and fresh call-ups. In fantasy you can re-build just as well (if not better) with a $8 Aaron Harang (yes, I like him this season) as you can with a $10 Wade Davis.
- At Value Players and Minor Bargains Can be the Best Keepers - Your $40 Albert Pujols or $35 Chase Utley is often a much better keeper than your $3 James Loney (I like him too) or your $7 Brian Roberts (one of my favorites). The value of a player is much more important than his price.
- Cheap Does Not Equal Keeper - Although we all hope that our one dollar relievers turn into closers and our $2 utility player earns a starting job but it rarely happens that way. Just because that utility guy hit .280 with 8 homeruns in just 200 at-bats does not mean that you should keep him. If at all possible you want to preserve the opportunity to draft a full-time starter in every spot.
- Roster Spots are like Gold - I have watched tons of owners treat their Corner Infielder Middle Infielder, and Utility positions as if they were not important. They bid aggressively at the auction and build reputations as tough traders only to waste spots on Geoff Blum (because he inspires poetry), Doug Mientkiewicz (because they like his name) and Eric Gagne (because he used to be your favorite player).
- This Season is Most Important - Sure, it is nice to imagine creating a dynasty with your large collection of cheap young players. But if you are considering tossing your $6 Ryan Franklin back into the draft because your think your $5 Chris Perez is the next closer for the Indians, you really need to think again. Play for this year, keep the future in mind, but the future should always be second to this season's chance at fantasy gold.
Tuesday, February 23, 2010
Monday, February 22, 2010
Some Terms to understand
Cost - The dollar amount attached to a player on a roster. (Albert Pujols cost $40)
Value - The amount a player is worth to a team in your league. (Albert Pujols is valued at $51 by BaseballHQ)
Profit - The difference between a players Cost and his Value. (If Pujols cost $40 and is valued at $51 his profit is $11)
What is Draft Inflation
Draft inflation is the cost beyond a players perceived value in an auction caused by budget dollars that exceed the value of the available player pool. A player's inflated value is his projected price on draft/auction day with inflation accounted for. It is important to know this value so you can properly evaluate what it will take to purchase a given player. It will also alert you to potential bargains and warn you of potential pitfalls during your auction.
When to Calculate Inflation
It is smart to calculate inflation frequently because it will change. First an estimated inflation should be calculated before you declare your keepers. This will give you a bit more information on the available player pool and the cost of the players you need and could convince you to change your keeper list. Inflation should be calculated again when the actual freeze rosters are announced. This is the most crucial calculation and will advance your auction prep. Inflation should also be calculated as frequently as possible during your auction. Inflation will change with each player acquisition. I elaborate on in-draft inflation below.
Things to consider before declaring your keepers in an Auction League
- Not every low-priced player is worth keeping. Treat every roster spot like gold.
- Having the best built-in profit going into the draft is nice, but having the most built in value (at the right prices) is more important.
- Is there depth in the player pool (or a lack) that might make a certain player worth keeping (or not)?
- Don't look for balance in your keeper list, instead look to maximize value.
- Consider the long term value of your players and also their cost as they develop. It may be more effective to place a player back into the draft and buy them at a higher price in exchange for a longer contract.
How to Calculate Inflation
Inflation equals (money to spend) divided by (value of remaining talent). Multiply each free agent player’s individual value by this amount and you will have the inflated value of each player. Some owners choose to make separate inflation calculations for pitchers and hitters.
In a standard 12-team auction league, with 23-man rosters and a $260 salary cap, there is a total of $3,120 to spend on 276 players. If the owners in our keeper league decide to freeze players with salaries totaling $1,000 but with a projected value of $1,500, then the players remaining in the player pool have a projected value of $1.620. However, the owners now have an extra $500, giving our owners $2,120 to spend on players worth just $1,620. We calculate our inflation by taking the money left to spend divided by the value of the remaining talent or $2,120/$1,620. This results in an inflation of 1.3086, or 31 percent. So if Pujols is valued at $51 and inflation is 31 percent, Pujols has an inflated value of 66.7386 or $67. So if Pujols is the first player called in the above scenario anything less than $67 spent on him should be considered a bargain.
The Per-Player Budget
An essential part of any auction strategy is the per-player budget. This is simply a guideline to the types of players you wish to acquire. On a piece of paper, list the positions required on each roster. Then fill in the names and salaries of anyone on your freeze list (if this is not a keeper league, then you get to skip that step). Next, divide your player acquisition budget amongst the slots with the approximate amounts it will take to roster the players you wish to own. A top outfielder may cost $40, a top-tier closer may go for $35. When all the slots are full and they total the amount you actually have left to spend, you will have completed your per player budget. Spend some time familiarizing yourself with the various players that might fit into these slots, but don’t become too attached to any one player or you could find yourself overbidding to get him.
A proper budget ensures that your team will acquire at least its fair share of the available talent. If there is $1,620 worth of talent available for 12 teams and we assume the freeze lists hold equal amounts of talent (a horrible assumption, I know) each owner must acquire at least $135 worth of talent to stay equal to their rivals. Thus, you must strive to use your remaining money to acquire talent as far exceeding that amount as possible.
Every auction has moments when players are either being overpriced or going at bargain prices. It is vital to your success that you understand when these periods are happening. In-draft inflation can be tricky to get a handle of when you are trying to track your draft and the rosters of your opponents. The easy way to monitor it is to use a program like RotoLab or Diamond Draft. The software will track the inflation in your auction every step of the way.
However, if you are forced to calculate it by hand, you can use my convenient shortcut. After the first player purchase, jot down how much above or below value (according to your projections) that player was. Do the same for every player that follows – adding or subtracting the difference in dollars. This will leave you with a running tally of how much above or below value the auction is at any given moment. If the number is a large positive value, then players have been overpriced and bargains are about to ensue. If the number is a large negative, the players have been bargains and the correction is coming soon. If the total stays at or just above or below zero, players are going almost exactly as you projected.
An Example from the Mailbag
I received the following e-mail from a reader. The message has been slightly edited and the names changed to protect the innocent...
I had an amazing team last year and was crushing my league all season until a traumatizing final day of the season comeback by the guy in second place where he gained 8 points and I lost 3...This does look like a tough decision. The first step is to look at the projected value of each of our potential keepers. (Values are from BaseballHQ.com)
In our league we can select 4 players to keep. Traditional logic would say that I should keep Wandy Rodriguez ($1) Ubaldo ($1) Tommy Hanson ($3) and Aaron Hill (3$) because they would give me the greatest relative value. However I also have on my team Pujols ($38) Kemp ($25) Ellsbury ($18) and Longoria ($25) who would all present some savings but not as much as the previous 4 I mentioned.
The league also has another weird rule that says that new teams are allowed to select any 4 players who were on a teams roster last year but not kept. I feel like if I go for the first 4 players I mentioned I would be doing well value wise, but the 2 new incoming managers would almost certainly keep the latter 4 who are all superior players but provide less value. How would you pick?
If we were interested in having the greatest built-in profit we would keep Wandy Rodriguez, Ubaldo Jimenez, Tommy Hanson, and Aaron Hill just as our reader suggested. They combine for a cost of just $8 with a collective value of $90 and a profit of $82. That is a pretty nice group of players to have. But is it the best group?
If we take the four most valuable players we would take Albert Pujols, Matt Kemp, Jacoby Ellsbury, and Wandy Rodriguez. Their combined cost would be much higher at $82 but with a collective value of $140 and profit of $58. This is also a good group. But is it more valuable to have $74 more dollars to spend or $50 more value or $24 more profit? This is a tough question to answer without knowing the league more intimately and having more details on the available player pool.
You could attempt to build a combination of players but I believe the second group is the way to go. The only change I'd be tempted to make would be to substitute Ubaldo Jimenez for Jacoby Ellsbury. This is based on my belief that cheap steals will be relatively easy to come by this season. As you will see when I release the All-Sleeper Teams later this week.
Friday, February 19, 2010
Photo from fOTOGLIF
Despite the bitter cold winds and the snow still on the ground, it feels like spring. Baseball is back. Not that it actually goes anywhere for those of us who are really into this stuff. I haven't posted as much as I would have liked to the last few weeks but trust me that I have a lot of work almost ready to go. So make sure you have subscribed to the RSS Feed, signed up for the free e-mails (check the sidebar), or just keep coming back everyday. You won't want to miss the sleepers, the mounds of draft prep I have for you, an article on calculating inflation and lots more.
Check out these cool sites that can advanced your fantasy prep immensely:
RotoBase.com (All the stats you need on a player in one place)
MLBDepthCharts.com (All the roster news and information you need)
RotoJunkie.com (The ultimate Fantasy Baseball Message Board)
Monday, February 08, 2010
Sabermetrics to Remain in Public Domain
On February 3, 2010, Deep Focus, Inc. withdrew its application to trademark the term “sabermetrics” for social media consulting services.
Sabermetrics was coined by statistician Bill James, who first introduced the word to readers of his Abstract in March 1980, writing: “Sabermetrics is the mathematical and statistical analysis of baseball records.” Since that time, sabermetrics has become a ubiquitous part of the baseball landscape at all levels and by players, front office staff, the media, and fans alike. Most major league teams use sabermetrically derived statistics as part of their player evaluations. Members of the Baseball Writers Association of America and others who report on baseball refer to sabermetrics and its metrics on a regular basis. Recently James has said that sabermetrics is a “declaration of no ownership of knowledge.”
“SABR appreciates that Deep Focus has seen the value of keeping the term ‘sabermetrics’ in the public domain,” said Executive Director John Zajc. “We now understand that there was no intent to restrict free use of the word, and we are glad that they respect that free use of the word benefits everyone.”
“The intent to use the term ‘sabermetrics’ was solely to describe our approach to evaluating engagement within social media, and not to own the term outright. In no way did we mean to restrict others’ use of the word,” said Deep Focus’ CEO Ian Schafer. “We are fans of the game and fans of the sabermetric approach of statistical evaluation. We owe great thanks to Bill James and other sabermetricians for inspiring us to think more objectively about performance.”
The Society for American Baseball Research is an international, member-driven organization whose mission is to foster the research, preservation, and dissemination of the history and record of baseball. More information is available on SABR’s website at: www.sabr.org.
Deep Focus is a leading full-service interactive marketing agency focused on measurable, results-driven engagement. More information is available on Deep Focus’ website at: www.deep-focus.net.